Airflo 7600


  Manufacturer's website

Hopper

  • 230 cu. ft. (200 cu. ft. and 30 cu. ft. if second metering system is used)
  • 409 stainless steel with 2 component epoxy primer and 2 component cross linked acrylic top coat paint system
  • Roll tarp installed

Booms

  • 60 ft, 57 ft. or 54 ft. spread width
  • Rubber torsion boom suspension
  • 304 stainless steel construction
  • Break away tips
  • 3 in. diameter tubes (6 per side)
  • 2 deflectors per tube

Metering

  • (2) 12 in., stainless steel conveyor chains
  • 15:1 final drive gearbox ratio
  • Ground drive metering
    • One way clutch allows you to back up with metering drive engaged
    • 1.5 ratio gearbox equipped with reversible gears provides an additional 2X gear range
    • 30 speed gearbox with 7% between settings
    • Oil bath gearboxes
  • Hydraulic metering drive options
    • A basic drive supplied with hydraulic motor only for completion by customer with system of their choice. Does not include radar, servo valve, encoders, controller/monitor, cables etc.
    • A Rawson AccuRate® Drive complete with hydraulic lines that is compatible with many of today’s GPS systems
    • A complete Raven System such as Viper Pro®, Envizio Pro® or SCS 660®

Fan

  • 17 in. impeller operates at 4700 RPM
  • 9 in. outlet
  • PTO fan drive
    • 1000 RPM CV, 13⁄8 in. 21 spline driveline
    • 1.5 ratio PTO gearbox
    • 4 band belt with tightener
    • 14:4.5 pulley ratio
  • Optional hydraulic fan drive
    • 28 CC motor, direct drive
    • Requires 35 GPM operating at 2225 PSI
    • 38.5 in. water column manifold pressure
    • 3/4 in. hydraulic lines
    • 3/4 in. couplers recommended
    • Case drain required

Hydraulics

  • 3 outlets required to operate standard functions
    • Boom fold and lock
    • Engage metering drive wheel
    • Operate half shut off on right boom
  • Requires additional remotes for optional hydraulic drives for fan and metering

Chassis

  • 72-120 in. adjustable axle
  • Single 3.5 in. axle with 10 bolt hub
  • 12.4-38 (320/85), 23.1-26 R1 or R3, 28L-26 (750/65) R1 tire sizes available

Second Metering System

  • 30 cu. ft. hopper (moveable panel allows you to utilize either entire 230 cu. ft. hopper or 30 cu. ft./200 cu. ft. split)
  • (2) 12 in., 28 groove metering rollers
  • 60 speed metering gearbox with 5% between settings
  • In-cab electric clutch control with 1⁄2 shut off on either side

Dimensions/Shipping Information

  • Total weight 7000 lb.
    • Transport: Hitch 1040 lb., Axle 5960 lb.
    • Field: Hitch 1360 lb., Axle 5640 lb.
  • 9 ft. 10 in. Transport width
  • 11 ft. 6 in. Transport height