245 Granular Applicator
- Home
- Fertilizer Equipment
- Air Flow Applicators
- 245 Granular Applicators
245 Granular Applicator
Hopper
- 40 cu. ft.
- Mild steel with 2 component epoxy primer and 2 component cross linked acrylic top coat paint system
- Weather tight lid
- Product level sight gauge
- Hopper bottom shut-off gates
Booms
- 50 ft. spread, breakaway tips
- Self levelling
- Manual fold
- 1.5 in. OD tubes, 12 outlets per side
Metering
- Ground driven
- Half shut off on either side
- 28 groove plastic fluted metering roller – 12 groove available for more coarse material or higher rates
- In-cab electric clutch control and air manifold monitor
- 60 speed gearbox with 5% between settings
- Air manifold and venturi system drop for easy cleaning
Fan
- Hydraulic drive:10.5 GPM – hydraulic lines to hitch included
- 11 HP gas engine fan drive
- PTO: 540 or 1000 RPM with 540 RPM PTO shaft standard
- 18 in. impeller with 4 in. outlet
- Operates at 3200-4000 RPM
Chassis
- 6000 lb. rubber torsion axle
- 6 bolt hubs
- 12.5 L – 15 in. tires
Options
- 12 groove roller assemblies for coarse material
- Agitator kit
- Disc markers or foam markers
Dimensions/Shipping Information
- Height: 6 ft. 8 in.
- Width: 7 ft. 8 in.
- Length: 18 ft.
- Weight: 2250 lb.
Note: Many features common to the 55 Series Implement Mount.